Hold keys 1, 4 and 7 while turning on the phone. You will see the display test.
Power-on the phone into service mode and type
76200 (4000er series) or
463951 (2000er and 3000er series) to get
to the service menu.
There you can check some options and on the next regular power-on, you’ll see the checked infos on the display. To get everything back to normal, repeat the procedure to uncheck these options.
Power the phone on into service mode and type
4685463 to reset the phone to factory settings - completely, i.e.
incl. all phonebook entries. (The normal factory reset keeps them!)
If you forgot the phone code, there seem to be 2 ways:
1. Get into the service menu and type:
4#, push OK,
8#9* and the red button.
2. Get into the service menu, move the selection to the menu separator (
---------) and type:
Doesn’t work for all phones!
Get into service mode and type
337766. This is useful to prepare older SL74 models for MMS sending:
- get into the EEPROM patcher
- Type part #1:
63508 65443 32604and confirm with OK
- Type part #2:
58644 58028 59475and OK
- power off the phone and power on again
Hold 1, 3 and 0 while powering on the phone. (1, 5, 9 and 0 should also work)
Seems to be a mode where the phone sends data all the time so that you can test radiation.
Zip code of Bocholt where the Gigasets are/were built ↩