wiki.mbirth.de

All you never wanted to know

View on GitHub
:new: 2012-08-20 :wavy_dash: :up: 2012-08-20

Western Digital GreenPower Disks

    Advanced Format

    Advanced Format disks are optimized for 4kB sectors. To format them under Linux, use parted with -a minimal and unit type s (sectors). (see here)

    IntelliPark

    WD GreenPower disks have some problems under Linux with their “head parking” feature parking the head every 8 seconds. This destroys the disk over a short time span.

    More info:

    Temporary fix

    To fix this, you have to disable it or set it to a more reasonable timeout:

    $ sudo hdparm -S 242 /dev/sdX
    

    You have to repeat this after each boot, so you may want to add the line to your /etc/rc.local.

    Permanent fix

    To fix this permanently, you can compile the tool wdidle3. There’s a bootable ISO available for download at ngohq.com. For Linux, there’s idle3ctl from the idle3-tools.

    You can display the current value with the following command:

    $ sudo ./idle3ctl -g /dev/sdX
    Idle3 timer set to 80 (0x50)
    

    The value 80 means 8 seconds (default). From 1-128, the values mean 1/10th of a second, e.g. 128 would be 12.8 seconds. 129-254 are in 30 seconds steps. 129 is 30 seconds, 130 is 60 seconds, etc.

    Set the desired value as follows:

    $ sudo ./idle3ctl -s 158 /dev/sdX
    Idle3 timer set to 158 (0x9e)
    Please power cycle your drive off and on for the new setting to be taken into account. A reboot will not be enough!
    

    Do as it says to enable the new setting.

    Loading Google+ comments…